Skip to content

Latest commit

 

History

History
139 lines (100 loc) · 4.52 KB

Pico CPU Monitor.md

File metadata and controls

139 lines (100 loc) · 4.52 KB
Raw

Controlling Pico from a Computer

⚠️ Please view the correctly rendered version of this page at https://www.espruino.com/Pico+CPU+Monitor. Links, lists, videos, search, and other features will not work correctly when viewed on GitHub ⚠️

  • KEYWORDS: Pico,LCD,CPU Usage,Connecting to PC
  • USES: Pico,PCD8544,PicoStarterKit,Graphics

Introduction

In this tutorial you'll use the Pico to display information that came from your computer on the LCD screen.

To send the data we'll use shell scripts that are already part of your computer.

You'll Need

![CPU Monitor](Pico CPU Monitor.jpg)

Wiring Up

Wiring this up is really simple, because the LCD draws so little power that we can power it from Espruino's GPIO lines... Simply place the Espruino Pico on the breadboard with the USB connector facing left, and then place the LCD directly above it, aligned to the right (so the pin on the Pico nearest the USB connector should not be connected to anything). See the picture for an example.

Software - Espruino

Just copy and paste the following into the right-hand side of the Web IDE, click Send to Espruino.

A5.write(0); // GND
A7.write(1); // VCC
var initialised = false;
var g;

function onInit() {
  // Setup SPI
  var spi = new SPI();
  spi.setup({ sck:B1, mosi:B10 });
  // Initialise the LCD
  g = require("PCD8544").connect(spi,B13,B14,B15, function() {
    initialised = true;
    draw(10);
  });
}

function draw(usage) {
  if (!initialised || usage===undefined) return;
  usage = parseFloat(usage.toString().replace(",",".")); // deal with numbers in the format `1,234` as opposed to `1.234`
  g.clear();
  g.drawString("CPU Usage: "+usage+"%");
  // draw 'needle'
  var ang = Math.PI*usage/100;
  g.drawLine(42,47,42-28*Math.cos(ang), 47-Math.sin(ang)*28);
  // draw labels
  for (var i=0;i<=100;i+=20) {
    ang = Math.PI*i/100;
    g.drawString(i, 42-36*Math.cos(ang)-(g.stringWidth(i)/2), 40-Math.sin(ang)*30);
  }
  // draw markings
  for (i=0;i<=100;i+=5) {
    ang = Math.PI*i/100;
    g.setPixel(42-30*Math.cos(ang), 47-Math.sin(ang)*30);
  }
  g.flip();
}

When it is sent, type save() on the right-hand side. This will save the code into Espruino itself so it always gets run when it powers on. You should see a little CPU usage meter!

Now, if you type draw(20) (or any number between 0 and 100) you'll see the CPU usage meter change position.

The next step is to get your computer to send the command draw(...) every so often to update the CPU usage.

Software - Host Computer

Unforunately every Operating system is different - pick yours from below:

Linux

Open a command prompt and try and run the following:

echo -e "draw(\"`ps -A -o pcpu | tail -n+2 | paste -sd+ - | bc`\")\n"

This should print something like draw("13.0338") - it's looking at the file /proc/stat and working out what your current CPU usage is. We're putting the number in a string so that even if your computer's language uses , as a decimal point, the Pico will still be able to parse it.

Next step is to 'pipe' the data straight to Espruino:

On Linux:

echo -e "draw(\"`ps -A -o pcpu | tail -n+2 | paste -sd+ | bc`\")\n" > /dev/ttyACM0

On Mac:

echo -e "draw(\"`ps -A -o pcpu | tail -n+2 | paste -sd+ - | bc`\")\n" > /dev/cu.usbmodem*

If a different device name was listed when you connected with the Web IDE, you may need to change it (note that on Mac, the device that you echo too should begin with /dev/cu.

When you execute that you should see the 'CPU Usage' indicator on the LCD change.

So now you just need to call it repeatedly:

;Linux
while :; do echo -e "draw(\"`ps -A -o pcpu | tail -n+2 | paste -sd+ | bc`\")\n" > /dev/ttyACM0; sleep 1; done
;Mac
while :; do echo -e "draw(\"`ps -A -o pcpu | tail -n+2 | paste -sd+ - | bc`\")\n" > /dev/cu.usbmodem*; sleep 1; done

And you're done - an external CPU usage meter!

Windows

Open Notepad, and paste in the following:

@echo off
:start
(@for /f "skip=1" %%p in ('wmic cpu get loadpercentage') do (@echo draw^(%%p^) > \\.\COM32))
@timeout 1 > nul
goto start

Be sure to change the COM32 to the number of the COM port you connected to with the Web IDE.

Then, save the file as cpumon.bat, disconnect the Web IDE from the board, and click on the batch file to run it.